Fomtec ARC 3×3 is a high efficiency multi purpose film forming foam (3×3). The main advantage of Fomtec ARC 3×3 is the 3% induction ratio on ALL class B fires, including polar solvents, in fresh or seawater. Characteristics for film forming foam are that it spreads rapidly across a fire. As a result, it is highly effective against hydrocarbon fires. Adding special polymers ensures it is also highly effective against polar solvents. The low surface tension of the water foam concentrate solution enables the aqueous film, which is heavier than the burning liquid, to float on top of the hydrocarbon liquid surface. When applied on polar solvents a polymeric membrane makes it possible for the foam blanket to extinguish effectively. This works also on foam destroying liquids such as MTBE.
FOMTEC ARC 3×3
Opis
Fomtec ARC 3×3 is a high efficiency multi purpose film forming foam (3×3). The main advantage of Fomtec ARC 3×3 is the 3% induction ratio on ALL class B fires, including polar solvents, in fresh or seawater.
Characteristics for film forming foam are that it spreads rapidly across a fire. As a result, it is highly effective against hydrocarbon fires. Adding special polymers ensures it is also highly effective against polar solvents.
The low surface tension of the water foam concentrate solution enables the aqueous film, which is heavier than the burning liquid, to float on top of the hydrocarbon liquid surface.
When applied on polar solvents a polymeric membrane makes it possible for the foam blanket to extinguish effectively. This works also on foam destroying liquids such as MTBE.
Characteristics for film forming foam are that it spreads rapidly across a fire. As a result, it is highly effective against hydrocarbon fires. Adding special polymers ensures it is also highly effective against polar solvents.
The low surface tension of the water foam concentrate solution enables the aqueous film, which is heavier than the burning liquid, to float on top of the hydrocarbon liquid surface.
When applied on polar solvents a polymeric membrane makes it possible for the foam blanket to extinguish effectively. This works also on foam destroying liquids such as MTBE.
Application
Fomtec ARC 3×3 is intended for use on class B hydrocarbon fuel as well as on polar solvent e.g. Isopropanol, Methanol and other foam destroying fuels such as MTBE. It uses only half the quantity to extinguish polar solvent fires in comparison to the traditional 3×6 foam concentrates. It can be used with both aspirating and non-aspirating discharge devices. It is compatible with all dry chemical powders.
Fire Performance & Foaming
Fomtec ARC 3×3 has been designed to give the best properties of:
- Aqueous film forming foam
- Alcohol resistant foam
The fire performance of this product has been measured and documented according to „International Approvals” stated in this document. The foaming properties are depending on equipment used and other variables such as water and ambient temperatures. Average expansion 7:1, average ¼ drainage time 09:00 minutes using UNI 86 test nozzle.
Proportioning
Fomtec ARC 3×3 can easily be proportioned at the correct dilution using conventional equipment such as:
- Inline inductors
- Balanced pressure, variable flow proportioning systems
- Bladder tanks
- Around the pump proportioning systems
- Water turbine driven foam proportioners
- Self inducting branch pipes and nozzles
The equipment should be designed to the foam type.
Compatibility
Contact one of the Fomtec sales team with questions.
Technical data
|
Appearance |
Clear yellowish liquid |
|
Specific gravity at 20°C |
1,040 +/- 0.01 g/ml |
|
Viscosity at 20°C |
≤ 2300 mPas |
|
pH |
6,5 – 8,5 |
|
Freezing point |
-15°C |
|
Recommended storage temperature |
-15 – 55°C |
|
Suspended sediment (v/v) |
Less than 0,2% |
|
Surface tension |
≤ 19,0 dynes/cm |
Environmental impact
Fomtec ARC 3×3 is formulated using raw materials specially selected for their fire performance and their environmental profile. Fomtec ARC 3×3 is biodegradable. The product is fully documented to the HOCNF regulations. The handling of spills of concentrate or foam solutions should however be undertaken according to local regulations. Normally sewage systems can dispose foam solution based on this type of foam concentrate, but local sewage operators should be consulted in this respect. This product contains NO PFOS or PFOA.
Full details will be found in the Material Safety Datasheet (MSDS).
Storage / Shelf life
Stored in original unbroken packaging the product will have a long shelf life. Shelf life in excess of 10 years will be found in temperate climates. As with all foams, shelf life will be dependent on storage temperatures and conditions. If the product is frozen during storage or transport, thawing will render the product completely usable.
Synthetic foam concentrates should only be stored in stainless steel or plastic containers. Since electrochemical corrosion can occur at joints between different metals when they are in contact with foam concentrate, only one type of metal should be used for pipelines, fittings, pumps, and tanks employed in the storage of foam concentrates. We recommend following our guidelines for storage and handling ensuring favourable storage conditions.
Packaging
We supply this product in 25 litre cans and 200 litre drums. We can also ship in 1000 litre containers or in bulk.
|
Litres per piece |
Packaging |
Part no |
|
25 litres |
Can |
12-3304-01 |
|
200 litres |
Drum |
12-3304-02 |
|
1000 litres |
Container |
12-3304-04 |
|
Bulk |
Special request |
|
International Approvals
- EN 1568 part 3 and 4
- Lloyds Register of Shipping
- MED Wheelmarked
- IMO 1312
- RINA
